Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastron G100.A55.B - TPS - Elastron Kimya A.S.

Material Data Center offers the following functions for Elastron G100.A55.B:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Elastron G datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.0191 mm/mm ASTM D 955
성형 수축률, 수직 0.0091 mm/mm ASTM D 955
기계적 특성값단위시험규격
ASTM 데이터
파단시 강도 4 MPa ASTM D 638
파단시 신율 700 % ASTM D 638
100% 변형시 탄성률 1.5 MPa ASTM D 412
300% 변형시 탄성률 2.1 MPa ASTM D 412
쇼어 A 경도 55 - ASTM D 2240
전단강도 27 kN/m ASTM D 624
압축세트, 22 hr @ 73 °F 19 % ASTM D 395
압축세트, 22 hr @ 158 °F 45 % ASTM D 395
열적 특성값단위시험규격
ASTM 데이터
UL94 난연성 HB - UL 94
기타 특성값단위시험규격
밀도 1160 kg/m³ ASTM D 792
특징
생산 공정
사출 성형
인도 유형
검정
특성
Soft Feel
내화학성에
General Chemical Resistance, Ozone Resistance
응용
자동차의
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.